Let's learn about the usage process and methods of gas-phase rust prevention bags with Suzhou Qingdao Xinyingxin Packaging Materials? Specifically, as follows:
The operation process of gas-phase rust prevention products is as follows:
Confirmation → Design proposal → Workpiece sorting → Packaging → Placement in vapor phase rust proof bag → Sealing → Storage and transportation
(1) Confirm. Start confirming that the gas phase rust proof bag used is a qualified product.
(2) Design proposal. According to the usage rules, calculate the usage of gas-phase rust prevention raw materials, design packaging methods (such as immediately using roll film, sheet film, or using flat bags, three-dimensional bags, etc.), and if the workpiece standards are large or numerous, increase the rust prevention bags or increase the decoration interval, and conduct experimental confirmation of the actual rust prevention effect.
(3) Workpiece organization. Arrange the workpieces that require rust proof packaging according to the required processing technology, tidy them up, and air dry them.
(4) Packaging. Small and medium-sized workpieces using roll film and sheet film can be immediately unpacked at the end of the production line and then loaded onto the vehicle. Using flat or three-dimensional bags, small and medium-sized workpieces can be immediately unpacked at the end of the production line and then loaded onto the truck. Small and medium-sized workpieces are packaged in boxes, and the vapor phase rust prevention bags are laid flat in the outer packaging boxes. After the workpieces are sorted from the left and right lines of the production line, they are neatly stacked in the vapor phase rust prevention bags.
The usage process and method of gas-phase rust proof bags
(5) Place in a vapor phase rust proof bag. According to the design scheme rules, a certain amount of vapor phase rust proof raw materials should be placed in a moderate position inside the packaging, such as increasing the decoration interval of the rust proof film in the middle of the parts, placing vapor phase rust proof boxes, vapor phase rust proof powder packs, etc.
(6) Sealed. After stacking the workpieces, seal the vapor phase rust proof bag (cover) immediately.
(7) Storage and transportation. During the entire storage process, it is advisable not to open the packaging. If it is necessary to open it, it should be sealed immediately and the gas phase rust prevention raw materials should be appropriately filled.
Attention should be paid during actual operation: employees must wear gloves and keep the rubber gloves neat. Unused gas-phase rust prevention products must be stored in a sealed and dry natural environment, and a certain amount of gas-phase rust prevention raw materials must be ensured to be placed.
CN
